Among the few good players in the market of Chequered ply in India, Northern Chequered ply manufacturers can be counted as one among the best. Chequered floor boards are high-density exterior grade plywood produced under high heat & pressure using un-extended PF resin. The ply has a chequered pattern on its surface that comes from the wire mesh put during pressing.
Because of high pressure the panel develops high density that sustains the rigours of flooring in public use. This not only eliminates the smooth surface of ordinary plywood but also makes it anti-slip plywood. The plywood combines enhanced mechanical properties with extreme wear-proof qualities, besides being resistant to corrosive agents.
The basic purpose of making plywood which is anti-slip and anti-skid is to accommodate it in the application of flooring that too in heavy vehicles and large containers. The advent of chequered ply manufacturers has revolutionized the flooring in those sectors and created fresh avenues in other sectors too.
Suggested uses: Extensive use in transport (i.e. bus floors, at the back of trucks, etc.) and railways as slip-resistant floorboard material as well as in staircases everywhere, kitchens, edges of swimming pools, flooring in gardens and farmhouses, high-use public areas like milk and telephone booths.
Resin Coated Chequered : Northern RC shuttering is manufactured by selected moderator hardwood veneers impregnated with thermosetting resin. Face veneer is also treated with resin to protected water for longer durability of the product. The surface of the coating is smooth and anti-corrosive with cement by using a specific type of chemical treatment to surface face veneer. Film Coated Chequered It is manufactured in India's best high-pressure hydraulic press with selected wood veneer of high density. An external coating of phenolic polymer film made in-house with imported craft paper gives smooth and glossy finish which provides the smooth surface to the shuttering area. This plywood resists the corrosive action of cement, water and sunlight. Because of its high density and waterproof properties it gives the more repetition in coating work.
Almunium Claded Chequered : Almunium claded chequered bus flooring consist with treated hardwood and five bar 1.5mm thickness aluminium sheet is being manufactured in 3500-tonne capacity hot press by the hot & cold process, It is high densified product and use unsaturated polyester resin and high degree polymer phenolic resin for its composing.
APPLICATION: Buses Deck, Heavy Automobile Floor, Paneling, Seats, Back Rest of Seats, It can be used for sound proofing, Reduction in temperature and vibrations.
ADHESIVE: (a) BWP Grade (b) Unsaturated Polyester resin with cobalt and celerator spread at all four side of the aluminium sheet up to 4" wide.
THICKNESSES: 9 to 12 mm SIZE: 8x4 feet Al. Sheet Thicknesses: 0.8 MM to 1.5 mm Density: 0.845 to 1.00 gm/cm3